Images may include options
Roller Laminating Machine
Features & Benefits exclusive to model 1967-AX-R+
Automatically follows contour of the foam sheet very quickly
• Quick and consistent spreading of glue over the surface of contoured sheets
High performance axis management
• Greater effeciency in small batch manufacturing mode and when coating contured plates
• High-speed throughput
Common Features & Benefits to both the 1967-AX-R+ and the 1967-AX-RS
Automatic detection of the incoming foam sheet height allows the correct height adjustment of the spreading roller
• Single operator mode available
• No recipes required, no manual input required
Continuously adjustable roller gap
• Accurately adjustable coating weight per unit area
High processing speed
• Increased throughput
Robust product design and tight dimensional tolerances
• Consistent production process
• Higher quality of the finished product
• Precise coating weight application
• Reduced glue consumption up to 50%
• Huge savings on glue
1967-AX-R+ | 1967-AX-RS | |
Maximum roller height (in) | 15.75 | |
Plate Width (in) no alignment bar | 82.5 | |
Plate Thickness (in) | 0.2 – 15.75 | |
Voltage, (v/ph/hz) | 400-480V 3PH 50-60HZ | |
Current (amps) | 20 | |
Motor types | AC | Brushless + AC |
Air pressure (psi) | 87 | |
Air consumption (cfm) | 0.7 | |
Weight (lbs) No options Weight (lbs) With belts & glue tank structure |
Contact Sales* | |
Dimensions (w/l/h,inch) No options Dimensions (w/l/h,inch) With conveyors and glue container structure |
Contact Sales* |
* Contact sales for details on what is included for weight and dimensions.
1967-AX-RS Laminate: 100′ per min.
1967-AX-R+ Laminate 140′ per min.
• 1967-PR: Pneumatic Press
• 1967-RF: Rollers Table
• 1967-NT: Conveyor belt
• 1967-NTS: Conveyor belt with adjustable width
• 1967-STG: Structure for 2 containers of glue
• 1967-AB: Alignment bar
• 1967-EP: Electrical panel expandable with more than 3 modules
• 1967-GFS: Auto glue feed system
• Transformer, depending on requirements
1967-AX-R:
Spreads glue over the entire surface of a foam plate or the crest of a contoured sheet. Spread glue over the entire surface of a contoured sheet while the height of the roller is set at the lowest point of the contour.
1967-AX-R+:
Automatically follow the contour of the foam. Contoured or foam plates can be glued evenly over the entire surface or selectively to conserve adhesive.