Model 1390A Auto Pac
Packaging with Polyethylene Film

 Model 1390MRH
Multi-Roll Holder for model 1390A
Packaging|1390A|1390MRH

Patent Pending


Splice Upper & Lower Film Rolls Double Seal NO WASTE!

Double Seals (Including Splice)
on four sides with or without trim.

 Model 1390A
Auto Pac
Important Facts!
  • Upper seal bar, permanently coated with
    durable Teflon, (low maintenance - No tape)
  • Double seal bars, constant heat, thermostatically controlled.
  • Ambient temperature conditions such as open dock doors do not affect operation, good seals every time.
  • Lower seal bars, quick & easy replacement of tape (15 minutes)
  • Seal bars are self-adjusting for all bed sizes.
Specifications & Options
  • Infeed 90”
  • Side seal 100”
  • Boot film holders (4)
  • Dual Seals on all four sides of mattress
  • Film may be trimmed if desired
  • Lower film magazine (standard)
  • Upper crane (optional)
  • Compression (optional)
Lower Film Roll Loading
When the operational roll is depleted, the Auto Pac stops. The operator pulls a handle that releases the next roll of film which rolls into position.The lower film magazine glides out on casters for ease of loading (above). The forklift operator tilts the forks and the film rolls into position. No lifting, no climbing under machine, one person operation. The Auto Pac may be loaded while in operation.
Upper Film Roll Loading
The operator, using the remote control, lowers the overhead crane, and the spreader bar is inserted into each end of the film roll. The film is safely lifted. The operator then maneuvers the conveniently located pull cord assembly to move the film into the correct position and lowers it onto the inclined film rack.When the upper film is depleted, the machine
stops automatically and the next film rolls
into position.
Replacement of Teflon Tape
Teflon tape surface may need to be replaced approximately every quarter (500 Hrs of operation). Operator removes Teflon tape from clip, lifts to unstick, pulls out new tape from roll (think cellophane tape dispenser) places end of tape back in clip.
Using the roller with extension, the operator rolls tape down to re-stick to lower seal surface. Total time to replace (3) lower seal bar tape is approximately 15 min.
Teflon tape supply will need to be replenished after approximately 2 years (4200 hours of operation). Operator drops in new roll and retracts the extender roller. Total time to replenish 5 minutes
Upper and lower boot film holder
Upper boot film holder
The holder for the boot film swings down to an ergonomically correct height for loading. A fail safe device locks the roll holder in place as it is rotated into the operational position.
Lower boot film holder
Splicing film - No Waste!
When the upper or lower film is depleted, the Auto Pac automatically stops and the operator releases the next roll which rolls into position. The operator places the trailing end of the depleted roll and the end of the new roll into the sealing clamp/guide assembly. The operator “double seals” the splice without wasting any film.
Replaceable parts available at local suppliers
Allen Bradley electronic components
are “off the shelf”
Long life, heavy-duty bearings.
All air Cylinders are rebuildable
“in plant” with an inexpensive
“0” ring kit.
* Call for complete details on warranty.
Movie - Viewing
Model 1390A
Auto Pac

Viewing a movie requires Media Player. It can be downloaded for FREE from one of the following links. If you do not have this application already installed on your computer then you will need to download and install before viewing a movie.

SOFTWARE Download:

Microsoft Media Player - Windows | Mac

MOVIE:
After software is installed you can view movies:

  1. Click on your preferred movie player from one of the two buttons above.
  2. Select the desired movie size from the pull down menu.
  3. The movie may take a few moments to load, depending on your connection speed.
Viewing and Printing

BROCHURE

Viewing and Printing PDF files require Adobe Reader.
If needed, download for FREE!

ATLANTA ATTACHMENT CO.
770 963-7369 - 770 963-7641 FAX
362 Industrial Park Drive, Lawrenceville, GA 30045 USA
sales@atlatt.com
This equipment is protected by one or more of the following patents: US patents: 4,038,933; 4,280,421; 4,432,294; 4,466,367; 4,644,883; 4,886,005; 5,134,947; 5,159,889; 5,203,270; 5,307,750; 5,373,798; 5,437,238; 5,522,332; 5,524,563; 5,562,060; 5,634,418; 5,647,293; 5,657,711; 5,743,202; 5,865,135; 5,899,159; 5,915,319; 5,918,560; 5,924,376; 5,979,345; 6,035,794. Foreign patents: 2,084,055; 2,076,379; 2,177,389; 2,210,569; 4-504,742; 8-511,916; 9-520,472; 0,537,323; 92,905,522.6; 95,935,082.8; 96,936,922.2. Other U.S. and Foreign Patents Pending.

© 2005 Atlanta Attachment Company. All rights reserved. All materials contained herein are additionally protected by United States copyright law and may not be used, disclosed, reproduced, distributed, published or sold without the express written consent of Atlanta Attachment, which consent may be withheld in Atlanta Attachment’s sole discretion. You may not alter or remove any copyright, trademark or other notice from copies of these materials. Atlanta Attachment Company, AAC, ?Sudden Service?, Sewing Automation, individually and when used in combination are registered trademarks of Atlanta Attachment Company. Singer is a registered trademark of Singer Manufacturing Co.

Last Updated: 7/27/07