Border - Serger




1961KIT10 - Border joining chainstitch




1961E624CH - 18"




1961E624EH - 36"


Click for Symbol Index

Model 1962

Dual Purpose Workstation for
BORDERS & GUSSETS

Over/Under Design

125 FPM of border serging both sides @ 4 SPI

No mechanical jack shaft drive
(Dual electronic servo drive motors with needle positioning)

ADVANTAGES

  • Uses two conventional overlock sewing heads
  • Only stock one set of replacement parts
  • Load and unload from front position
  • Material capacity: 0” - 18” standard (up to 72” optional)
  • Turn off either sewing head for single serging
  • Dual electronic servo motors
  • Needle positioning (no synchronizer required)
  • Electronic thread break detection
  • Variable tensioning of border material
  • Servo drive variable speed puller with long lasting urethane rollers
  • Servo drive variable tension rewinder
  • Stops automatically for material splice
  • Foot pedal activation for splicing and servicing
  • Border may be serged without edge trim

OPERATION

The operator loads the border through the front tension assembly and uses the foot pedal to sew it through the sergers. Activating the puller lift switch opens the puller, the cloth is inserted between the rollers and the switch closes the puller.

The operator places the cloth between the spindle rods on the winder and presses the start button. The unit automatically serges all the material on the roll, or in the bin and automatically stops when the end of the material is sensed. The unit stops with the trailing edge of the material held by the front tension assembly so that the leading edge of the next band can be easily spliced. The finished width of the goods being sewn can be adjusted by turning a crank and moving the left serger. A scale is provided which indicates the finished width of the goods being sewn.

SPECIFICATIONS 18" 36"
Max sewing speed (rpm) 6000
Factory pre-set speed (rpm) 5000
Max stitch length (spi) 4
Needle system SNB27140
Needle size 22/140
Weight of material MEDIUM
Voltage (v/ph/hz) 220V 1PH 60HZ
Current (amps) 10
Motor type EFKA DC
Air pressure (psi) 80
Air consumption (cfm) 14
Shipping Weight (lbs) 1200 1800
Shipping Dimensions (w/l/h, Inch) 62 x 96 x 57 62 x 96 x 75
SPECIFICATIONS
Feet per min. 125

Video
View Media Player movie: Right click and Download - 2.1 MB
View Quicktime movie: Right click and Download - 9 MB

Download		 PDF Viewing & Printing
Adobe Acrobat Reader - Required for viewing and Printing PDF - FREE!: download

Atlanta Attachment Company
362 Industrial Park Drive
Lawrenceville, GA 30045 USA
770 963-7369 ph
770 963-7641 fax
sales@atlatt.com

This equipment is protected by one or more of the following patents:
US patents: 4,280,421; 4,432,294; 4,466,367; 4,644,883; 5,134,947; 5,159,889; 5,203,270; 5,522,332; 5,524,563; 5,562,060; 5,634,418; 5,647,293; 5,657,711; 5,743,202; 5,865,135; 5,899,159; 5,915,319; 5,918,560; 5,979,345; 6,035,794; 6,055,921; 6,202,579; 6,279,869; 6,295,481; 6,494,255; 6,802,271; 6,574,815B2; 6,834,603B1; 6,968,794B1; 6,994,043B1; 7,100,525B1; 7,100,526B1; 7,210,181B1 Foreign patents: 9-520,472; 0,537,323; 92,905,522.6; 96,936,922.2; 2,076,379; 2,084,055. Other U.S. and Foreign Patents Pending.

© 2008 Atlanta Attachment Company. All rights reserved.
All materials contained herein are additionally protected by United States copyright law and may not be used, disclosed, reproduced, distributed, published or sold without the express written consent of Atlanta Attachment, which consent may be withheld in Atlanta Attachment’s sole discretion. You may not alter or remove any copyright, trademark or other notice from copies of these materials.

Atlanta Attachment Company, AAC, Atlanta Parts Depot, Sudden Service, Sewing Automation, individually and when used in combination are registered trademarks of Atlanta Attachment Company.

Last Updated: 5/2/08