Automated Apparel Manufacturing Equipment


Attachments & Labor Saving Devices
Your Product Index
Folders & Manual Attachments

Belt Loop
Bibbing & Banding
Book Facing /
Collar Setting / Taping

Cuff Setting
Label Setting Foot
Lap Seam
Material Guides
Row Cap
Strap & Handle
Two Tone Tucking

Folders & Manual Attachments
Indexed by Model Number

191B Collarette binding folder
192 Collarette binding folder for attaching knit binding to necks and arm holes of knit garments
192A/314B Hem and band folder
192-8 Collarette with air jet feed
193 Picot trim binder
195-2 Carpet binding
199E Right angle binder, flat bed mount
201 Right angle binder
201-E Binder with continuous elastic insertion
202 Right angle swing binder
204 Right angle semi-fold binder
205 Right angle tape binder
205A Right angle tape binder
205-B Swing type right angle tape binder
206 Elastic binder
206-1 Elastic binder
207 Right angle welting binder
207-A Right angle cording binder
208-A Straight binding set, flat bed mount
208-B Straight binding set, set in needle plate, plastics, vinyl, leatherette
209 Right angle binding with piping
210-B Attach and make row cap attachment, invisible stitch
210-CS Attach row cap to pant
210C Row cap attachment for U.S. 53100
210 Series Row cap attachments
211 Fitted sheet binder with elastic or raw rubber
212 Off angle binder
212-E Right angle binder with elastic
214-A 30º binder with raw rubber for vinyl baby pants
214-B Right angle binder with raw rubber for vinyl baby pants
215 Right angle cap binder for vent opening on baseball caps
220 Edge trim bind folder
221 Mattress tape binder, block binders
221-4R Cut and insert binder
251 "C" type binder for vinyls
251-E Elastic "C" type binder with tension
252 "C" type binder for material on rolls
254 Straight binder
260 Pillow case hemmer
261 Combination bed sheet hemmer set
262 Bed sheet hemmer
265 Side drapery hemmer
266 Downturn adjustable cuff hemmer
267 Downturn adjustable cuff hemmer
268-B1 Adjustable cuff hemming attachment
268 Adjustable cuff attachment for hemming cuff over lining
269-2 Cuff setting attachment
270 Hem with pre-made cord piping
271 Binding folder with adjustable guide, bed plate mounting
272 Horn folder with cord filler
273 Overhead book facing folder, available with air jet feed
274 Book facing folder with swing-out hemmer
275 Downturn hemmer with interlining
276 Spring loaded heavy-duty hemmer
280 Front pocket hemmer
283 Automatic hemmer - with pre-fold
284 Special felling attachment
285 Upturn rod hemmer
286 Heavy duty hemmer
288 Heavy duty hemmer
295 Downturn back pocket hemmer
295-1 Downturn back pocket hemmer with rod
295-C Downturn clean finish hemmer
296 Downturn back pocket hemmer with tongue
297 Automatic back pocket hemmer
298 Clean finish hemmer with fringe guide
299 Upturn clean finish hemmer for bellows pocket
300-A Clean finish hemmer
300-B Blindstitch hemmer - clean finish, swing-out
300-B1 Upturn clean finish hemmer, swing-out
300-C Patch Pocket hemmer
300-C1 Upturn clean finish hemmer, swing-out
300-D Downturn clean finish hemmer with tongue
300-F Upturn clean finish hemmer with flare
301 Clean finish swing hemmer
301AJ Air jet hemmer
301-A Clean finish hemmer, swing-out
301-C Clean finish blindstitch hemmer
301-F Upturn clean finish hemmer with flare
301-G Upturn clean finish hemmer for vinyl
301-L Upturn clean finsih hemmer with lining
302 Clean finish hemmer
302-1 Clean finish hemmer
302-2 Clean finish hemmer, heavy-duty for bulky material
302-3 Upturn clean finish hemmer
303 Upturn clean finish button stay hemmer with lining or other trims
304 Downturn double roll hemmer
304-1 Downturn double roll hemmer
305 Double roll hemmers
305-A Double roll hemmers with adjustable guide
305-A-S Double roll hemmers with adjustable guide and spring
305-D Button stay hemmer
305-D1 Button stay hemmer for heavy or bulky materials
305-D2 Button stay hemmer, large work plate
305-DL Button stay hemmer with lining
305-DR Button stay hemmer reverse
305-D3 Automatic type shirt front hemmer
306 Rod pocket hemmer, double roll for curtains
307 Pigtail hemmer
307-A Split hemmer
307-B-4 Split bulldog hemmer
307-C Automatic hemmer, clean finish
307-C-5 Automatic hemmer, short body
307-D Automatic hemmer, single fold
307-4 Upturn split hemmer
308 Adjustable blindstitch hemmer
308-A Latch hemmer, blindstitch
308-B Latch hemmer, plain sewer
309 Shirt tail spring hemmer, contour shirt tails
309-1 Shirt tail spring hemmer, straight bottoms
310 Swing up hemmer
311 Upturn core hemmer, vinyl material
312 Plain Hemmer
312-1 Towel end hemmer, with spring for crossing seams
313 Plain hemmer, without core
313-A Adjustable picot hemmer
313-1 Plain hemmer, without pin
313-2 Long core pin hemmer
314-A Single upturn hemmer
314-A5 Book seam folder for blindstitch
314-8 Upturn hemmer, with air jets
314-B Single downturn hemmer, swing-out
314-B10 Single downturn hemmer
314-B-36-8 Air Jet Hemmer
314-C Adjustable upturn hemmer
314-C1 Single upturn hemmer
314-D Single turn cord folder
314-E Clean finish hemmer with cord insert
315 Gore hemmer
315-1 belt closing folder with top stitch guide
315-2 Attach zipper fly, top stitch
315-3 Heavy duty gore hemmer for closing bags, on swing arm
316 Double yoking attachment
316-D Single needle sleeving attachment, 1st operation
316-E Single needle sleeving attachment, 2nd operation
316-F Double needle imitation sleeving attachment for 2-needle machine
317 Mousetrap blindstitch hemmer, clean finish
318 Clean finish hemmer for terry cloth or fleece
318-C Bag closing clean finish hemmer
320 3-way hemmer, full turn-back
321 Downturn hemmer with adjustable guide
327-E-F Presser foot for 327 Rimoldi, fitted sheets
327-EG Edge Guide
327-E-T Elastic tension for Rimoldi
331 Two-in-one zipper fly attachment
350 Tunnel elastic hemmer
350-1 Tunnel elastic hemmer, downturn
350-2 Tunnel elastic hemmer, downturn
350-3 Downturn tunnel elastic for panty waist
350-US Tunnel elastic hemmer with tacking device
350-T Tacking elastic attachment for 300W; U.S.; Rimoldi; Metropolitan Machines
350-C Downturn clean finish hemmer with heavy cord for bed spreads
351 Elastic hemmer, swing-away
352 Elastic "C" binder
353 Open elastic attachment with adjustable elastic guide
353-1 Imitation tunnel elastic
353-23 Imitation tunnel hemmer for raw rubber
354 Double needle elastic hemmer
357 Elastic hemmer with tacking device
358-2 Raw edge elastic waistband, strip load
359 Covered elastic attachment
359-1 Covered elastic attachment with swing-out hemmer
359-2 Covered elastic attachment
360 Top stripper foot
360-1 Taping folder for flatlock, flatseamer
361 Multi needle taping attachment
363 Elastic strap folder, downturn
365 Jacket yoking folder
368 Self-welt folder with cord
371 Downturn button stay hemmer
375 Waistband curtain attachment, custom designs
376 Waistband curtain attachment, custom designs
377 Waistband attachment, row-cap
385 Double needle sleeve hemming attachment with elastic
387 Collar taping folder
395 Short placket or waistband, strip load
395-1 Short placket or waistband, extra short
395-2E Strip load elastic waistband folder for stretch waistband jeans
397 Collapsible placket or waistband, strip load
398 Cording attachment
400 Top stitch binder for roll feed
401 Side stitch loop folder for roll feed
402 Placket folder, strip-load
402-3 Placket folder, uneven turnbacks
402-4 Strip load waistband or placket, semi-fold
402-FE Finished end placket/waistband
402-6 Strip placket/waistband, off-set margins
402-B Strip placket with cord welting
402-L Waistband attachment with lining
402-4-L Waistband attachment with lining, clean finish top, serged or bound bottom
402-8-L Waistband attachment with lining., vacuum and tensioner
403 Belt and loop folder, strip load
403-FE Finished end belt-strap folder, strip-load
403-2 French facing folder
404 Straight belt or strap folder, roll feed
404-1 Straight folder for vinyl or plastic material
404-D Straight folder
405 Center stitch folder
406 French belt folder
406-1 French belt or belt loop folder
406-2 Belt - belt loop - bra strap
406-2-L Bra strap - belt - belt loops
406-3 Blindstitch belt loop
406-3L Blindstitch belt loop for Galkin or other loop material trimmers
407 Handle folder
408 Cord handle folder
409 Arm-hole facing attachment
409-1 Arm-hole facing attachment
409-2 Arm-hole facing attachment
410 Button stay folder
410-2 Button stay folder, foot-mounted hemmer
410-7 Button stay folder, under-stripper
410-L Button stay folder with lining
411 Top center folder on swing up bracket
411-B Top center folder with cord piping
411-L Top center folder with lining
411-2 Shirt front hemmer
411-4L Top center folder, strip load
412 Imitation center folder, available with lining no. 412-1
412-A Imitation center folder, two operations required
412-L Imitation center folder
412-2 Imitation drapery side hemmer
412-3 Imitation center front folder with separate lower facing
412-4 Imitation center-stitch folder
412-5 Imitation back pocket welting folder
413 Center stitch belt folder, overlap
414 Belt and belt loop folder, butt seam
414-1 Belt loop folder
414-A Blindstitch belt loop folder with lining
414-B Fusing machine folders
414-LRP Roller press folder for fusing machines
414-G Belt loop folder for galkin cutters
415 Upholstery double cord handle folder
416 Lined handle and belt folder
419 Collander machine folders for strap or other trim making, hot roller press
420 Sleeve facing folder, strip load
420-8 Sleeve facing folder with air jet feed
421 "C" type banding folder
422 Imitation cuff folder, downturn
422-A Imitation cuff folder, upturn
423 Elbow banding folder
423-1 Elbow banding for small sizes
423-3C Collapsible elbow bander with adjustable top margin
423-E Continuous feed elastic waistband attachment for jeans with stretch waistband, when elastic had not been pre-stitched to band
423-E1 Continuous feed elastic waistband attachment, when elastic has been pre-stitched to band
423-3 right angle elbow banding
423-4 Eight angle elbow strap or belt folder
423-5 Elbow banding
423-6 Elbow banding
423-7 Right angle elastic waistband folder
F423 Mounting Bracket series
423-14 Mounting Brackets, for Union Special 5000 series
424 Blue jean waistband folder, available with air jet
425 Over and under banding set
426 Bibbing and banding overalls
427 Under bed stripper
430 Contour waistband attachment with finished end
430-1 Contour waistband attachment with continuous feed
431 Finished end belt & tab attachment
439 Semi stripper, roll feed
439-1 Semi stripper
440 Upper strippers, roll feed
441 Pocket facing folder
441-1 Pocket facing folder, adjustable
441-2 Pocket facing folder, open side
442-1 Cap sweatband folder, roll feed
447 Pre-made cord piping, swing-out
447-2 & 3 Pre-made right angle piping, also the swing out version
448 Sandwich cord piping
448-1 Sandwich piper, no cord
448-2 Sandwich cord piper, swing-out
448-3 Sandwich piper
448-4 Topstitch cord piper
449 Piggy back cord piping
451-1 Cord piper for curves & corners
453 Straight type cord welter
453-1 Cord welter, swing-out
453-4 Cord welter, swing-out, plain sewer
453-6 Piggy back welting
454 Pre-made cord welt, swing-out
454-1 Pre-made double cord welt
455-2 Cord piping for overlock, angled type, swing-out
455-3 Plain piping for overlock, right angle type, swing-out, no cord
455 Cord piping for overlock machines, straight or angled, swing-out
455-1 Plain piping for overlock machines, straight type-swing-out, no cord
455-4 Piggy back cord piping for overlock, swing-out
455-5 Piggy back plain piping for overlock, swing-out, no cord
455-6 Pre-made piping for overlock
455-7 Pre-made piggy back piping for overlock
468 Right angle book folder for sandwich operation, swing-out
500 Downturn zipper attachment, garment bag, pocket book panels, etc.
501 Upturn zipper attachment, double needle
501-2 Zipper attachment, double needle
502 Zipper attachment, garment bag, pocket book panels, etc., for 300W
503 Downturn zipper attachment, garment bag, pocket book panels, etc.
504 Zipper attachment with bound edge, garment bag panels, etc.
506 Single needle zipper attachment
509 Gun case zipper, roll feed
51420 GA-8 Pocket label on back yoke seam
518 Adjustable trim setting attachment
519 Imitation lap seam attachment
519-4 Two-tone tucking attachment, upturn
519-5 Two-tone tucking attachment, upturn with contrasting strip
519-SE Shell edge stitch folder
520 Spaghetti attachment
520-1 Right angle spaghetti attachment
520-2 Imitation spaghetti attachment
550 Adjustable lace or trim guide
575 Adjustable ric-rac gide
600 Sandwich piping set
601 Top stitch & piping set
650 Top stitch feet
650-1 Top stitch feet, single fold downturn hemmer foot for coverstitch machine
651 Top stitch foot, downturn
652 Collar band hemmer, upturn
653-A Ball foot hemmer, upturn
653-S Spring foot hemmer, upturn with spring
655 Tube foot
656 Top stitch joiner foot
656-A & B Top stitch joiner, left & right
656-C & D Semi joiner, Left & Right
656-E Side seam and seam bust, one operation
657-A & B Top stitch joiner left
659 Cap sweatband and visor, roll feed
661-A Adjustable guide
661-B Right angle adjustable guide
661-C Adjustable guide, upper
661-Q Stretch waistband elastic attachment
746 Raw edge lap seam guide
747 Double lap seam folder
748 Semi-fold lap seam folder
750 Lap seam folder
751 Lap seam folder
752 Lap seam folder, without spring, for U.S. 56400-56500
752-1 Lap seam folder with spring, for U.S. 56400-56500
752-D Lap seam folder, for U.S. 35800, with spring
752-K Lap seam folder, U.S. 35800
752-V Lap seam folder, sleeving, for U.S. 56400-56500
753 Lap seam folder, without spring, for 300W machines
778 Bottom reel
780-U Universal binding reel
780-U1 Universal tape and binding reel with ball bearing
781 Clamp on binding stand, on rotating
781-2 Ball bearing binding stand with brake, table mount
781-3 & 4 Piping stand
782 Overhead tape stand
783 Elastic stand, cone bearing
785 Top and bottom binding reel
785-A9 Aluminum hub
786B Ball bearing stand, double
787 Self-centering cone bearings
848 Two-piece blanket binder set
849 Blanket Binders for mitered corners
849-1 Blanket & sheet border binder, on swing arm
854-P Sheet & Blanket border binder
890 Double binders with adjustable guides

Atlanta Attachment Company
362 Industrial Park Drive, Lawrenceville, GA 30046 USA
770 963-7369 ph
770 963-7641 fax

© 2009 Atlanta Attachment Company. All rights reserved.
All materials contained herein are additionally protected by United States copyright law and may not be used, disclosed, reproduced, distributed, published or sold without the express written consent of Atlanta Attachment, which consent may be withheld in Atlanta Attachment’s sole discretion. You may not alter or remove any copyright, trademark or other notice from copies of these materials.Atlanta Attachment Company, AAC, Atlanta Parts Depot, Sudden Service, Sewing Automation, individually and when used in combination are registered trademarks of Atlanta Attachment Company.

Last Updated: 3/23/09