|
Model
|
Description |
| 191B |
Collarette binding folder |
| 192 |
Collarette binding folder for attaching knit binding to necks and arm holes of knit garments |
| 192A/314B |
Hem and band folder |
| 192-8 |
Collarette with air jet feed |
| 193 |
Picot trim binder |
| 195-2 |
Carpet binding |
| 199E |
Right angle binder, flat bed mount |
| 201 |
Right angle binder |
| 201-E |
Binder with continuous elastic insertion |
| 202 |
Right angle swing binder |
| 204 |
Right angle semi-fold binder |
| 205 |
Right angle tape binder |
| 205A |
Right angle tape binder |
| 205-B |
Swing type right angle tape binder |
| 206 |
Elastic binder |
| 206-1 |
Elastic binder |
| 207 |
Right angle welting binder |
| 207-A |
Right angle cording binder |
| 208-A |
Straight binding set, flat bed mount |
| 208-B |
Straight binding set, set in needle plate, plastics, vinyl, leatherette |
| 209 |
Right angle binding with piping |
| 210-B |
Attach and make row cap attachment, invisible stitch |
| 210-CS |
Attach row cap to pant |
| 210C |
Row cap attachment for U.S. 53100 |
| 210 Series |
Row cap attachments |
| 211 |
Fitted sheet binder with elastic or raw rubber |
| 212 |
Off angle binder |
| 212-E |
Right angle binder with elastic |
| 214-A |
30º binder with raw rubber for vinyl baby pants |
| 214-B |
Right angle binder with raw rubber for vinyl baby pants |
| 215 |
Right angle cap binder for vent opening on baseball caps |
| 220 |
Edge trim bind folder |
| 221 |
Mattress tape binder, block binders |
| 221-4R |
Cut and insert binder |
| 251 |
"C" type binder for vinyls |
| 251-E |
Elastic "C" type binder with tension |
| 252 |
"C" type binder for material on rolls |
| 254 |
Straight binder |
| 260 |
Pillow case hemmer |
| 261 |
Combination bed sheet hemmer set |
| 262 |
Bed sheet hemmer |
| 265 |
Side drapery hemmer |
| 266 |
Downturn adjustable cuff hemmer |
| 267 |
Downturn adjustable cuff hemmer |
| 268-B1 |
Adjustable cuff hemming attachment |
| 268 |
Adjustable cuff attachment for hemming cuff over lining |
| 269-2 |
Cuff setting attachment |
| 270 |
Hem with pre-made cord piping |
| 271 |
Binding folder with adjustable guide, bed plate mounting |
| 272 |
Horn folder with cord filler |
| 273 |
Overhead book facing folder, available with air jet feed |
| 274 |
Book facing folder with swing-out hemmer |
| 275 |
Downturn hemmer with interlining |
| 276 |
Spring loaded heavy-duty hemmer |
| 280 |
Front pocket hemmer |
| 283 |
Automatic hemmer - with pre-fold |
| 284 |
Special felling attachment |
| 285 |
Upturn rod hemmer |
| 286 |
Heavy duty hemmer |
| 288 |
Heavy duty hemmer |
| 295 |
Downturn back pocket hemmer |
| 295-1 |
Downturn back pocket hemmer with rod |
| 295-C |
Downturn clean finish hemmer |
| 296 |
Downturn back pocket hemmer with tongue |
| 297 |
Automatic back pocket hemmer |
| 298 |
Clean finish hemmer with fringe guide |
| 299 |
Upturn clean finish hemmer for bellows pocket |
| 300-A |
Clean finish hemmer |
| 300-B |
Blindstitch hemmer - clean finish, swing-out |
| 300-B1 |
Upturn clean finish hemmer, swing-out |
| 300-C |
Patch Pocket hemmer |
| 300-C1 |
Upturn clean finish hemmer, swing-out |
| 300-D |
Downturn clean finish hemmer with tongue |
| 300-F |
Upturn clean finish hemmer with flare |
| 301 |
Clean finish swing hemmer |
| 301AJ |
Air jet hemmer |
| 301-A |
Clean finish hemmer, swing-out |
| 301-C |
Clean finish blindstitch hemmer |
| 301-F |
Upturn clean finish hemmer with flare |
| 301-G |
Upturn clean finish hemmer for vinyl |
| 301-L |
Upturn clean finsih hemmer with lining |
| 302 |
Clean finish hemmer |
| 302-1 |
Clean finish hemmer |
| 302-2 |
Clean finish hemmer, heavy-duty for bulky material |
| 302-3 |
Upturn clean finish hemmer |
| 303 |
Upturn clean finish button stay hemmer with lining or other trims |
| 304 |
Downturn double roll hemmer |
| 304-1 |
Downturn double roll hemmer |
| 305 |
Double roll hemmers |
| 305-A |
Double roll hemmers with adjustable guide |
| 305-A-S |
Double roll hemmers with adjustable guide and spring |
| 305-D |
Button stay hemmer |
| 305-D1 |
Button stay hemmer for heavy or bulky materials |
| 305-D2 |
Button stay hemmer, large work plate |
| 305-DL |
Button stay hemmer with lining |
| 305-DR |
Button stay hemmer reverse |
| 305-D3 |
Automatic type shirt front hemmer |
| 306 |
Rod pocket hemmer, double roll for curtains |
| 307 |
Pigtail hemmer |
| 307-A |
Split hemmer |
| 307-B-4 |
Split bulldog hemmer |
| 307-C |
Automatic hemmer, clean finish |
| 307-C-5 |
Automatic hemmer, short body |
| 307-D |
Automatic hemmer, single fold |
| 307-4 |
Upturn split hemmer |
| 308 |
Adjustable blindstitch hemmer |
| 308-A |
Latch hemmer, blindstitch |
| 308-B |
Latch hemmer, plain sewer |
| 309 |
Shirt tail spring hemmer, contour shirt tails |
| 309-1 |
Shirt tail spring hemmer, straight bottoms |
| 310 |
Swing up hemmer |
| 311 |
Upturn core hemmer, vinyl material |
| 312 |
Plain Hemmer |
| 312-1 |
Towel end hemmer, with spring for crossing seams |
| 313 |
Plain hemmer, without core |
| 313-A |
Adjustable picot hemmer |
| 313-1 |
Plain hemmer, without pin |
| 313-2 |
Long core pin hemmer |
| 314-A |
Single upturn hemmer |
| 314-A5 |
Book seam folder for blindstitch |
| 314-8 |
Upturn hemmer, with air jets |
| 314-B |
Single downturn hemmer, swing-out |
| 314-B10 |
Single downturn hemmer |
| 314-B-36-8 |
Air Jet Hemmer |
| 314-C |
Adjustable upturn hemmer |
| 314-C1 |
Single upturn hemmer |
| 314-D |
Single turn cord folder |
| 314-E |
Clean finish hemmer with cord insert |
| 315 |
Gore hemmer |
| 315-1 |
belt closing folder with top stitch guide |
| 315-2 |
Attach zipper fly, top stitch |
| 315-3 |
Heavy duty gore hemmer for closing bags, on swing arm |
| 316 |
Double yoking attachment |
| 316-D |
Single needle sleeving attachment, 1st operation |
| 316-E |
Single needle sleeving attachment, 2nd operation |
| 316-F |
Double needle imitation sleeving attachment for 2-needle machine |
| 317 |
Mousetrap blindstitch hemmer, clean finish |
| 318 |
Clean finish hemmer for terry cloth or fleece |
| 318-C |
Bag closing clean finish hemmer |
| 320 |
3-way hemmer, full turn-back |
| 321 |
Downturn hemmer with adjustable guide |
| 327-E-F |
Presser foot for 327 Rimoldi, fitted sheets |
| 327-EG |
Edge Guide |
| 327-E-T |
Elastic tension for Rimoldi |
| 331 |
Two-in-one zipper fly attachment |
| 350 |
Tunnel elastic hemmer |
| 350-1 |
Tunnel elastic hemmer, downturn |
| 350-2 |
Tunnel elastic hemmer, downturn |
| 350-3 |
Downturn tunnel elastic for panty waist |
| 350-US |
Tunnel elastic hemmer with tacking device |
| 350-T |
Tacking elastic attachment for 300W; U.S.; Rimoldi; Metropolitan Machines |
| 350-C |
Downturn clean finish hemmer with heavy cord for bed spreads |
| 351 |
Elastic hemmer, swing-away |
| 352 |
Elastic "C" binder |
| 353 |
Open elastic attachment with adjustable elastic guide |
| 353-1 |
Imitation tunnel elastic |
| 353-23 |
Imitation tunnel hemmer for raw rubber |
| 354 |
Double needle elastic hemmer |
| 357 |
Elastic hemmer with tacking device |
| 358-2 |
Raw edge elastic waistband, strip load |
| 359 |
Covered elastic attachment |
| 359-1 |
Covered elastic attachment with swing-out hemmer |
| 359-2 |
Covered elastic attachment |
| 360 |
Top stripper foot |
| 360-1 |
Taping folder for flatlock, flatseamer |
| 361 |
Multi needle taping attachment |
| 363 |
Elastic strap folder, downturn |
| 365 |
Jacket yoking folder |
| 368 |
Self-welt folder with cord |
| 371 |
Downturn button stay hemmer |
| 375 |
Waistband curtain attachment, custom designs |
| 376 |
Waistband curtain attachment, custom designs |
| 377 |
Waistband attachment, row-cap |
| 385 |
Double needle sleeve hemming attachment with elastic |
| 387 |
Collar taping folder |
| 395 |
Short placket or waistband, strip load |
| 395-1 |
Short placket or waistband, extra short |
| 395-2E |
Strip load elastic waistband folder for stretch waistband jeans |
| 397 |
Collapsible placket or waistband, strip load |
| 398 |
Cording attachment |
| 400 |
Top stitch binder for roll feed |
| 401 |
Side stitch loop folder for roll feed |
| 402 |
Placket folder, strip-load |
| 402-3 |
Placket folder, uneven turnbacks |
| 402-4 |
Strip load waistband or placket, semi-fold |
| 402-FE |
Finished end placket/waistband |
| 402-6 |
Strip placket/waistband, off-set margins |
| 402-B |
Strip placket with cord welting |
| 402-L |
Waistband attachment with lining |
| 402-4-L |
Waistband attachment with lining, clean finish top, serged or bound bottom |
| 402-8-L |
Waistband attachment with lining., vacuum and tensioner |
| 403 |
Belt and loop folder, strip load |
| 403-FE |
Finished end belt-strap folder, strip-load |
| 403-2 |
French facing folder |
| 404 |
Straight belt or strap folder, roll feed |
| 404-1 |
Straight folder for vinyl or plastic material |
| 404-D |
Straight folder |
| 405 |
Center stitch folder |
| 406 |
French belt folder |
| 406-1 |
French belt or belt loop folder |
| 406-2 |
Belt - belt loop - bra strap |
| 406-2-L |
Bra strap - belt - belt loops |
| 406-3 |
Blindstitch belt loop |
| 406-3L |
Blindstitch belt loop for Galkin or other loop material trimmers |
| 407 |
Handle folder |
| 408 |
Cord handle folder |
| 409 |
Arm-hole facing attachment |
| 409-1 |
Arm-hole facing attachment |
| 409-2 |
Arm-hole facing attachment |
| 410 |
Button stay folder |
| 410-2 |
Button stay folder, foot-mounted hemmer |
| 410-7 |
Button stay folder, under-stripper |
| 410-L |
Button stay folder with lining |
| 411 |
Top center folder on swing up bracket |
| 411-B |
Top center folder with cord piping |
| 411-L |
Top center folder with lining |
| 411-2 |
Shirt front hemmer |
| 411-4L |
Top center folder, strip load |
| 412 |
Imitation center folder, available with lining no. 412-1 |
| 412-A |
Imitation center folder, two operations required |
| 412-L |
Imitation center folder |
| 412-2 |
Imitation drapery side hemmer |
| 412-3 |
Imitation center front folder with separate lower facing |
| 412-4 |
Imitation center-stitch folder |
| 412-5 |
Imitation back pocket welting folder |
| 413 |
Center stitch belt folder, overlap |
| 414 |
Belt and belt loop folder, butt seam |
| 414-1 |
Belt loop folder |
| 414-A |
Blindstitch belt loop folder with lining |
| 414-B |
Fusing machine folders |
| 414-LRP |
Roller press folder for fusing machines |
| 414-G |
Belt loop folder for galkin cutters |
| 415 |
Upholstery double cord handle folder |
| 416 |
Lined handle and belt folder |
| 419 |
Collander machine folders for strap or other trim making, hot roller press |
| 420 |
Sleeve facing folder, strip load |
| 420-8 |
Sleeve facing folder with air jet feed |
| 421 |
"C" type banding folder |
| 422 |
Imitation cuff folder, downturn |
| 422-A |
Imitation cuff folder, upturn |
| 423 |
Elbow banding folder |
| 423-1 |
Elbow banding for small sizes |
| 423-3C |
Collapsible elbow bander with adjustable top margin |
| 423-E |
Continuous feed elastic waistband attachment for jeans with stretch waistband, when elastic had not been pre-stitched to band |
| 423-E1 |
Continuous feed elastic waistband attachment, when elastic has been pre-stitched to band |
| 423-3 |
right angle elbow banding |
| 423-4 |
Eight angle elbow strap or belt folder |
| 423-5 |
Elbow banding |
| 423-6 |
Elbow banding |
| 423-7 |
Right angle elastic waistband folder |
| F423 |
Mounting Bracket series |
| 423-14 |
Mounting Brackets, for Union Special 5000 series |
| 424 |
Blue jean waistband folder, available with air jet |
| 425 |
Over and under banding set |
| 426 |
Bibbing and banding overalls |
| 427 |
Under bed stripper |
| 430 |
Contour waistband attachment with finished end |
| 430-1 |
Contour waistband attachment with continuous feed |
| 431 |
Finished end belt & tab attachment |
| 439 |
Semi stripper, roll feed |
| 439-1 |
Semi stripper |
| 440 |
Upper strippers, roll feed |
| 441 |
Pocket facing folder |
| 441-1 |
Pocket facing folder, adjustable |
| 441-2 |
Pocket facing folder, open side |
| 442-1 |
Cap sweatband folder, roll feed |
| 447 |
Pre-made cord piping, swing-out |
| 447-2 & 3 |
Pre-made right angle piping, also the swing out version |
| 448 |
Sandwich cord piping |
| 448-1 |
Sandwich piper, no cord |
| 448-2 |
Sandwich cord piper, swing-out |
| 448-3 |
Sandwich piper |
| 448-4 |
Topstitch cord piper |
| 449 |
Piggy back cord piping |
| 451-1 |
Cord piper for curves & corners |
| 453 |
Straight type cord welter |
| 453-1 |
Cord welter, swing-out |
| 453-4 |
Cord welter, swing-out, plain sewer |
| 453-6 |
Piggy back welting |
| 454 |
Pre-made cord welt, swing-out |
| 454-1 |
Pre-made double cord welt |
| 455-2 |
Cord piping for overlock, angled type, swing-out |
| 455-3 |
Plain piping for overlock, right angle type, swing-out, no cord |
| 455 |
Cord piping for overlock machines, straight or angled, swing-out |
| 455-1 |
Plain piping for overlock machines, straight type-swing-out, no cord |
| 455-4 |
Piggy back cord piping for overlock, swing-out |
| 455-5 |
Piggy back plain piping for overlock, swing-out, no cord |
| 455-6 |
Pre-made piping for overlock |
| 455-7 |
Pre-made piggy back piping for overlock |
| 468 |
Right angle book folder for sandwich operation, swing-out |
| 500 |
Downturn zipper attachment, garment bag, pocket book panels, etc. |
| 501 |
Upturn zipper attachment, double needle |
| 501-2 |
Zipper attachment, double needle |
| 502 |
Zipper attachment, garment bag, pocket book panels, etc., for 300W |
| 503 |
Downturn zipper attachment, garment bag, pocket book panels, etc. |
| 504 |
Zipper attachment with bound edge, garment bag panels, etc. |
| 506 |
Single needle zipper attachment |
| 509 |
Gun case zipper, roll feed |
| 51420 GA-8 |
Pocket label on back yoke seam |
| 518 |
Adjustable trim setting attachment |
| 519 |
Imitation lap seam attachment |
| 519-4 |
Two-tone tucking attachment, upturn |
| 519-5 |
Two-tone tucking attachment, upturn with contrasting strip |
| 519-SE |
Shell edge stitch folder |
| 520 |
Spaghetti attachment |
| 520-1 |
Right angle spaghetti attachment |
| 520-2 |
Imitation spaghetti attachment |
| 550 |
Adjustable lace or trim guide |
| 575 |
Adjustable ric-rac gide |
| 600 |
Sandwich piping set |
| 601 |
Top stitch & piping set |
| 650 |
Top stitch feet |
| 650-1 |
Top stitch feet, single fold downturn hemmer foot for coverstitch machine |
| 651 |
Top stitch foot, downturn |
| 652 |
Collar band hemmer, upturn |
| 653-A |
Ball foot hemmer, upturn |
| 653-S |
Spring foot hemmer, upturn with spring |
| 655 |
Tube foot |
| 656 |
Top stitch joiner foot |
| 656-A & B |
Top stitch joiner, left & right |
| 656-C & D |
Semi joiner, Left & Right |
| 656-E |
Side seam and seam bust, one operation |
| 657-A & B |
Top stitch joiner left |
| 659 |
Cap sweatband and visor, roll feed |
| 661-A |
Adjustable guide |
| 661-B |
Right angle adjustable guide |
| 661-C |
Adjustable guide, upper |
| 661-Q |
Stretch waistband elastic attachment |
| 746 |
Raw edge lap seam guide |
| 747 |
Double lap seam folder |
| 748 |
Semi-fold lap seam folder |
| 750 |
Lap seam folder |
| 751 |
Lap seam folder |
| 752 |
Lap seam folder, without spring, for U.S. 56400-56500 |
| 752-1 |
Lap seam folder with spring, for U.S. 56400-56500 |
| 752-D |
Lap seam folder, for U.S. 35800, with spring |
| 752-K |
Lap seam folder, U.S. 35800 |
| 752-V |
Lap seam folder, sleeving, for U.S. 56400-56500 |
| 753 |
Lap seam folder, without spring, for 300W machines |
| 778 |
Bottom reel |
| 780-U |
Universal binding reel |
| 780-U1 |
Universal tape and binding reel with ball bearing |
| 781 |
Clamp on binding stand, on rotating |
| 781-2 |
Ball bearing binding stand with brake, table mount |
| 781-3 & 4 |
Piping stand |
| 782 |
Overhead tape stand |
| 783 |
Elastic stand, cone bearing |
| 785 |
Top and bottom binding reel |
| 785-A9 |
Aluminum hub |
| 786B |
Ball bearing stand, double |
| 787 |
Self-centering cone bearings |
| 848 |
Two-piece blanket binder set |
| 849 |
Blanket Binders for mitered corners |
| 849-1 |
Blanket & sheet border binder, on swing arm |
| 854-P |
Sheet & Blanket border binder |
| 890 |
Double binders with adjustable guides |
