• Automatically serges both edges of a band of material and winds into a roll
• 1000 linear inches of material sewn per minute
• Electrical lock out / tag out capability
• Variable speed puller with urethane rollers
• Electronic thread break detection
• Clutch motor driven left and right sergers
• Turn off left head for single edge serging
• Foot pedal operation for manual sewing
• Variable torque winding
• Stops automatically when material runs out
• Variable tensioning of material as it is fed into the system
• Material capacity from 5" to 15" in width

Description:
An automatic workstation for serging both sides of a band of rolled or festooned material. This unit incorporates a variable torque winder on the rear of the machine to roll the material after serging.

Operation
The operator loads the band of cloth through the front cloth tension assembly and uses the foot pedal to sew it through the right and left sergers. The puller lift switch opens the puller, the cloth is inserted between the rollers and the switch closes the puller. The operator places the cloth between the spindle rods on the winder and presses the start button. The unit automatically serges all the material on the roll, or in the bin and automatically stops when the end of the material is sensed. The unit stops with the trailing edge of the material held by the front tension assembly so that the leading edge of the next band of material can be easily stapled on. Additionally, the finished width of the goods being sewn can be adjusted by turning a crank and moving the left serger. A scale is provided which indicates the finished width of the goods being sewn.

Machine Class
Pegasus